MTKD-FE/CUNI EX

https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Thermoelectric voltage terminal block pair, TC type J, nom. voltage: 400 V, nominal current: 1 A, connection method: Screw connection, number of connections: 4, number of positions: 2, cross section: 0.2 mm² - 4 mm², AWG: 24 - 12, width: 10.4 mm, color: gray, mounting type: NS 35/7,5, NS 35/15, NS 32 The figure shows version MTKD-CU/ CUNI Your advantages  These special terminal blocks are used to extend thermocouple equalizing conductors in corresponding measuring circuits  The equalizing conductors are made from materials which, up to temperatures of 200°C, have the same thermal characteristics as the corresponding thermocouples Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356678148 Weight per Piece (excluding packing) 16.800 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of positions 2 Number of levels 1 Number of connections 4 Potentials 1 Nominal cross section 2.5 mm² 06/13/2020   Page 1 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Technical data General Color gray Insulating material PA Flammability rating according to UL 94 V0 Maximum power dissipation for nominal condition 0.77 W Maximum load current 1 A (with 4 mm² conductor cross section) Nominal current IN 1A Nominal voltage UN 400 V (Voltage to the neighboring feed-through terminal block MTK.) Open side panel Yes Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 10.4 mm End cover width 1 mm Length 46.2 mm Height NS 35/7,5 39.9 mm Height NS 35/15 47.4 mm Height NS 32 44.9 mm Connection data Connection 1 level Connection method Screw connection Screw thread M3 Stripping length 7 mm 06/13/2020   Page 2 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Technical data Connection data Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 24 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.2 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.2 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Internal cylindrical gage A3 Standards and Regulations Connection in acc. with standard CUL IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 06/13/2020   Page 3 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141142 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141142 eCl@ss 8.0 27141142 eCl@ss 9.0 27141142 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000904 ETIM 6.0 EC000904 ETIM 7.0 EC000904 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 06/13/2020   Page 4 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Classifications UNSPSC UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals ATEX Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 300 V Nominal current IN 10 A mm²/AWG/kcmil 28-12 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     Nominal voltage UN 300 V Nominal current IN 10 A mm²/AWG/kcmil 28-12 EAC      FILE E 60425  FILE E 60425  EAC-Zulassung 06/13/2020   Page 5 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Approvals EAC  cULus Recognized      RU CDE.A*30.B.01742      Accessories Accessories DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     06/13/2020   Page 6 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     06/13/2020   Page 7 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     06/13/2020   Page 8 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     06/13/2020   Page 9 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     06/13/2020   Page 10 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-MTK - 3101029 End cover, length: 46 mm, width: 1 mm, height: 28.7 mm, color: gray     Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     06/13/2020   Page 11 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48     06/13/2020   Page 12 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36     Partition plate Partition plate - ATS-MTK - 3101223 Partition plate, width: 1 mm, color: gray     Screwdriver tools Screwdriver - SZS 1,0X4,0 VDE - 1205066 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker card - SBS10:UNBEDRUCKT - 1007248 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, perforated, mounting type: snap into tall marker groove, snap into flat marker groove, for terminal block width: 10 mm, lettering field size: 6 x 10.1 mm, Number of individual labels: 250     06/13/2020   Page 13 / 14 https://www.phoenixcontact.com/us/products/3100047 Thermoelectric voltage terminal block pair - MTKD-FE/CUNI EX - 3100047 Accessories Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 06/13/2020   Page 14 / 14